Crown CTS2000 Amplifier

Crown CTS2000 Amplifier

Power Amps / More Crown Products for Sale

$2,431.00

Item #3377. Vendor Model: Crown CTS2000. This Item Does Not Qualify for Free Shipping. The Guaranteed Lowest Price! 45 Day Return Policy on Most Items!

Large Image/Picture of Crown CTS2000 Amplifier

Images:
Power Output Table , Full Image

Crown CTS2000 Amplifier
Built on the foundation of the Com-Tech series, Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements.

Performance

Frequency Response (at 1 watt, 20Hz - 20 kHz)
ą0.25 dB

Phase Response (at 1 watt, 10Hz - 20 kHz)
ą20°

Signal to Noise Ratio below rated power (20 Hz to 20 kHz)
<-102 dB A-weighted

Total Harmonic Distortion (THD) at 1 watt, from 20 Hz to 20 kHz
<0.05%

Damping Factor 10 Hz to 400 Hz
>3000

Crosstalk (below rated power, 20 Hz to 1 kHz)
>80 dB

Common Mode Rejection (CMR) (20 Hz to 1 kHz)
>50 dB

DC Output Offset (Shorted input)
<10 mV

Input Impedance nominally balanced, nominally unbalanced
20 k ohms, 10 k ohms

Maximum Input Level (before input compression)
+20 dBu

Load Impedance (Note: Safe with all types of loads)
-Stereo 2, 4, 8, 5 (70V), and 10 ohms (100V
-Bridge Mono 4, 8, 16, 10 (140V), and 20 ohms (200V)

Voltage Gain (at maximum level setting), 1.4V sensitivity
-4/8 Ohm Operation
--41:1 (32 dB)
-70V Operation
--39:1 (32 dB)
-100V Operation
--39:1 (32 dB)

Required AC Mains
120V 60 Hz, 220/230/240V/50 Hz

Power Draw at Idle (120VAC mains)
-All channels in 4/8 ohm mode
--24W (Standby Mode)
-All channels in 70V mode
--24W (Standby Mode)

Cooling
Variable-speed forced air

Dimensions
-Width, 19 in. (48.3 cm.)
-Height, 3.5 in. (8.9 cm.)
-Depth 14 in. (35.6 cm.)

Net Weight
26 lb (11.8 kg)