|
|
|
|
|
|
|
|
Dynamic Stabilizer
Shure's exclusive viscous-damped Dynamic Stabilizer maintains a uniform distance between the cartridge and the record under difficult playing conditions, even those caused by warped records or mismatched tonearm mass. When such stabilization is not required, the stabilizer brush can be locked up into its detent position, which, under ideal playing conditions, can provide even better sound quality.
Side-Guard Stylus Protection System
The innovative stylus protection system helps prevent stylus damage if the cartridge accidentally slides across a record. This unique feature responds to side thrusts on the stylus by withdrawing the entire stylus cantilever and tip safely into the stylus housing before the cantilever can be damaged.
Die Cast Aluminum Mounting Block
Ensures secure, vibration-free attachment to the tonearm.
|
Features:
Tone Arm Mount: Standard 1/2 inch
Cartridge Type: Moving magnet
Cantilever:
-Shure Type II - Very low mass
-Heat-treated aluminum alloy / tubular
-1.0 mil wall thickness / 20 mil diameter
Diamond Stylus Tip:
-Polished natural gemstone
-Elliptical
-Side x front radii: 0.2 x 0.7 mil
Tracking Force:
-Effective at stylus tip
-Range: 0.75 to 1.50 grams
-Optimum: 1.25 grams
Trackability: At 1 gram tracking force (cm per second peak velocity)
-1 kHz - 44
-10 kHz - 31
Amplitude: 80 µm at 400 Hz
Frequency Response: Essentially flat from 20 to 22,000 Hz
Stereo Channel Balance: Within 2 dB
Channel Separation: Typical at 1 kHz: 25 dB
Output Voltage: Typical at 1 kHz: 4.0 mV RMS at 5 cm/sec peak velocity
Recommended Load: 47 kilohms in parallel with 250 pf
Net Weight: 6.6 grams
Height: 15.875 mm
Replacement Stylus: N97xE
Headshell screwdriver
Stylus cleaning brush
Mounting hardware
Stylus guard
|
|
