Unlike most ribbon motors designed today with an offset ribbon the new Cascade FAT HEAD houses a hand-tuned ribbon element that incorporates the legendary symmetrical ribbon design. This design offers a true figure 8 pattern. The corrugated aluminum membrane itself is positioned in the center from front to back, thus producing a balanced audio input signal to both sides of the ribbon assembly. This design is very useful when executing a mid-side or Blumlein recording set-up and also great for live stage use. The FAT HEAD warm full-bodied signature and increased sensitivity is what you would expect and demand from a professional ribbon microphone and the FAT HEAD delivers. The FAT HEAD is suited for guitar cabinets, drum over-heads, vocal, piano, horns, strings and much more.
|
Features:
Type: Ribbon (velocity) Microphone
Ribbon type & Dimensions: 99% Pure aluminum, 2.5 micron, 1 3/4" (L) X 3/16" (W)
Polar pattern: Figure 8 Symmetrical design
Sensitivity: -56 db +/- 2 dB (0 dB=1V/Pa)
Frequency response: 30 to -18,000 Hz (+/- 3dB)
Output Impedance: <=200 Ohms
Recommended load impedance: >1000 Ohms
Max.SPL (1% THD @1000 Hz): 165 dB
Connector: 3-Pin male XLR
Size: Diameter: 3" (O.D. grill), overall length 6-1/2", 7/8" (O.D. body)
|
