|
|
|
|
|
|
|
|
The Micstasy can be used analog (Mic/Line In to Line Out) and digital (Mic/Line In to Digital Out), with both signal paths operating simultaneously. Special highlight: the device is fully remote-controllable via MIDI (also MIDI over MADI).
It's innovative concept allows for amplification and digitization of ALL analog signal sources. Be it high-level stage signals, typical studio signals, lower level and high-impedance instruments, or dynamic, condenser or ribbon microphones: Micstasy understands them all - in a way that is simply thrilling.
|
Features:
8 balanced XLR mic/line inputs with 85 dB gain range
Analog input level from -56.5 dBu up to +30 dBu
High-end circuitry with 4 relays per channel, super low-noise microphone front-end
Near click-free gain changes in steps of 0.5 dB
Large frequency range (200 kHz) with special EMI input filtering
8 balanced TRS line / instrument inputs with Hi-Z option
8 balanced XLR line outputs, maximum level +27 dBu
4x AES/EBU Out via D-sub, 8 channels @ 192 kHz
2x ADAT Out, 8 channels @ 96 kHz
Optional MADI I/O (I64 MADI Card) with serial cascading and digital return path
Symmetrical hi-pass (Lo Cut) with super-low THD, 18 dB/oct
LED level meter with 13 LEDs per channel
M/S de-/encoding for the digital output
AutoSet: Automatic gain reduction with multiple linking
Current state can be stored to 8 user presets
Fully remote controllable
Technical Specifications:
Frequency response -0.1 dB: 20 Hz - 100 kHz
EIN @ 30 dB Gain @ 150 Ohm: 122.3 dBu
EIN @ 40 dB Gain @ 150 Ohm: 126.5 dBu
EIN @ 50/60/70 dB Gain @ 150 Ohm: 127.4 dBu
THD+N @ 30 dB Gain: < -100 dB, < 0.001 %
Signal to Noise ratio AD (SNR) @ +30 dBu: 115.2 dB RMS unweighted, 118.5 dBA
Signal to Noise ratio AD (SNR) @ +21 dBu: 112.7 dB RMS unweighted, 116 dBA
Signal to Noise ratio AD (SNR) @ +13 dBu: 110 dB RMS unweighted, 113 dBA
Sync sources: Internal, AES, word, Option (MADI)
Sample frequencies: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, variable (external clocks)
Sample rate range: MADI: 32 - 192kHz, word clock: 27kHz - 200kHz, AES: 28kHz - 200kHz
Jitter: Typical < 1 ns for internal, word clock, AES and MADI input
Jitter suppression: >30 dB (2.4 kHz)
Jitter sensitivity: all PLLs operate error-free even at 100 ns
Power supply: Internal switching mode PS, 100V - 240V AC, 60 Watt
|
|
