 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| |||||||||||||
| |||||||||||||
| |||||||||||||
| |||||||||||||
The XD Series Digital UHF Wireless System is the wireless solution you've been waiting for. Designed specifically for instrument applications, this 24-bit digital system delivers your tone and performance with the sound and feel of a direct wire connection - all at a price that won't break the bank. X2's proprietary digital technology provides superior fidelity while the "stomp-box" style receiver's internal micro-processor selects the data stream from among the internally mounted Q-diversity™ antennas to eliminate dropouts, interference including DTV, compander ICs and the associated 'pumping' and 'breathing' that squashes your tone, and other problems associated with analog wireless technology. All of this sound and performance is provided to you with an incredible feature set including: 24-bit digital converters yielding 117 dB dynamic range to capture your most expressive performances, five user-selectable operating frequencies, auto DigiScan™ to confidently select an open channel, frequency response all the way down to 20 Hz for truly thundering lows, stereo 1/4" output for instrument and full-bandwidth or 'tuner out' applications, and a five segment LED display (battery status, link status, audio level and channel). Operating the system is unlike any wireless you've tried before. Simply connect the transmitter to the source via the 1/8" threaded-collar locking connector and the "stomp-box" style receiver to your amplifier, mixer or pedal-board. Then power up making sure the transmitter and receiver are set to the same channel. That's it. You're ready to go! No knobs to adjust and no antennas to loose or break mean you're up and running in approximately the same time it takes to connect a cable. With the XD Series Digital UHF Wireless System from X2, you'll have the freedom and sound to deliver your most expressive performance every time without breaking the bank! Overall System Specifications Transmission Format: X2 proprietary digital audio transmission Frequency Response: 10 Hz - 12 kHz Audio Dynamic Range: Greater than 117 dB Distortion: 0.03% THD RF Carrier Frequency: 902 MHz to 928 MHz, FSK Number of Selectable Frequencies: Five RF Output Power: 10mw Audio Output Level: Unity gain with transmitter input Polarity: Positive voltage at input yeilds positive voltage at output Transmission Range: >150 feet line-of-sight (may vary due to local conditions) FCC Approval: Part 15 approved, no user-license required DT95 Transmitter Specifications A/D Conversion: 24-bit Delta Sigma, 128 times over sampling Input Impedance: 1.3 M-Ohm Connectors: 1/8" Unbalanced locking connector Controls: Power On/Off, Channel Select Five Segment LED Display: Power On, Channel, Battery Life, Audio Level Meter Dimensions: 3.078" W x 1.17" D x 4.7" H Battery Life: Switching power supply, ~12 Hours (9v alkaline) Weight: .25 lbs. (with 9v battery installed) DR95 Receiver Specifications D/A Conversion: 24-bit Delta Sigma, 128 times over sampling Output: 2.12V RMS (Unbalanced: 7K Ohm) Connectors: 1/4" Unbalanced stereo output, tip= instrument voicing, sleeve= full bandwidth LED Display: Power On, Data Link, Channel, Battery Life, Audio Level Meter Controls: Power On/Off, Channel/Mode Select Dimensions: 3.078" W x 1.17" D x 4.7" H Power Requirements: 9V DC via alkaline battery (~8hrs) or optional AC power supply Weight: .45lbs. Approx. 
| |||||||||||||
